| Holemaking | 鑽削刀具 |
| Solid Carbide Drills 全鎢鋼鑽頭 | ||
|
DP Series ．High performance for universal drilling. ．DPC 3D~30D drills with internal coolant. ．DPN 3D~50D drills with external coolant ．High rigidity geometry & UNIX smooth coating. |
．高效能泛用鑽孔用 ．3 ~ 30 倍徑內冷鑽 ．3 ~ 50 倍徑外冷鑽 ．高剛性及高鋁鈦平滑塗層 |
|
DPT Series ．High feed for steel and cast iron drilling. ．3F drills with internal coolant. ．3D~5D drills & UNIX smooth coating. |
．高進給鑽孔 , 適用於鋼料與鑄鐵 ．3 刃內冷鑽 ．3、5 倍徑鑽孔深度及高鋁鈦平滑塗層 |
|
DM Series ．High performance for exotic material drilling. ．3D ~ 5D drills with internal or external coolant ．Sharp geometry & SINIX smooth coating.
|
．高效能鑽頭 , 適用於難切削材 ．內冷 / 外冷鑽及 3、5 倍徑鑽孔深度 ．鋒利刀口及含矽平滑塗層
|
|
DN Series ．For non-ferrous material (aluminum, copper, etc.). ．DNC with internal coolant. ．5D drills & NDLC coating. |
．適用於非鐵金屬 ( 鋁、銅等材質 ) 加工 ．DNC 內冷鑽 ．5 倍徑鑽孔及彩鑽塗層 |
|
DF Series ．High performance for non-flat drilling. ．3D drills with external coolant. ．UNIX smooth coating. |
．高效能平底鑽適用於斜面或曲面鑽孔 ．外冷鑽及 3 倍徑鑽孔深度 ．高鋁鈦平滑塗層 |
|
DA Series ．High performance for drilling and reaming with straight flute. ．External coolant and 3D~5D drills. ．UNIX smooth coating. |
．高效能直刃鑽鉸刀 ．外冷鑽及 3、5 倍徑鑽孔深度 ．高鋁鈦平滑塗層 |
|
DG Series ．General purpose drilling. ．External coolant and 3D~5D drills. ．UNICO coating. |
．泛用鑽孔用 ．外冷鑽及 3、5 倍徑鑽孔深度 ．高鋁鈦塗層 |
|
DT Series ．For spotting. ．Provide 90°,120° and 142° tip angle. ．UNICO coating. |
．定位鑽孔用 ．提供 90° , 120°及 142°鑽尖 ．高鋁鈦塗層 |
|
DC Series ．For center drilling. ．Provide countersink angle 60°and 90°. ．UNICO coating. |
．中心鑽孔用 ．提供 60°及 90°埋頭孔 ．高鋁鈦塗層 |
| Indexable Drilling Tools 捨棄式鑽頭 | ||
|
DMU Series ．Use DMUA inserts. ．Various diameter size inserts can fit in one tool. ．Hole diameter 13~25.4mm, drilling depth 3D~10D.
|
．使用 DMUA 刀片 ．各種尺寸的刀片可以安裝在一個刀桿 ．適用 13 ~ 25.4mm 孔徑加工 , 3~10 倍徑鑽孔深度
|
|
DSP Series ．Use SPMG inserts with 4 sides cutting edge. ．2D, 3D, 4D, 5D drills. ．Hole diameter 12.5 ~ 41mm.
|
．使用含有 4 個切削角的 SPMG 刀片 ．2、3、4、5 倍徑鑽孔深度 ．適用 12.5 ~ 41mm 孔徑加工
|
|
DWC Series ．Use WCMT inserts with 3 sides cutting edge. ．2D, 3D, 4D, 5D drills. ．Hole diameter 14 ~ 60mm.
|
．使用含有 4 個切削角的 WCMT 刀片 ．2、3、4、5 倍徑鑽孔深度 ．適用 14 ~ 60mm 孔徑加工
|
|
DWD Series ．Use WDXT inserts with 4 sides cutting edge. ．3D, 4D, 5D drills. ．Hole diameter 8 ~ 25mm.
|
．使用含有 4 個切削角的 WDXT 刀片 ．3、4、5 倍徑鑽孔深度 ．適用 8 ~ 25mm 孔徑加工
|