| High Feed Milling | 高進給銑削 |
 |
 |
CXBN Series ．Use BNMX double-sided inserts with 4 cutting edges. ．High feed and low cutting force offers better productivity. ．15 ~ 100mm cutter diameter, max. 1.4mm depth of cut. |
．使用 BNMX 雙面銑刀片 , 4 個可用切削角 ．高進給及低切削阻力設計確保較大的生產率 , 適用於各種應用及材料 ．15 ~ 100mm 刀桿直徑 , 最大切削深度可達 1.4mm |
 |
|||
 |
|||
 |
 |
CXLN Series ．Use LNMX double-sided inserts with 4 cutting edges. ．High feed and sharp cutting edges for low cutting force applications. ．16 ~ 50mm cutter diameter, max. 0.9mm depth of cut. |
．使用 LNMX 雙面銑刀片 , 4 個可用切削角 ．高進給及大前角設計的切削刃實現極低切削阻力 , 達成高金屬移除率 ．16 ~ 50mm 刀桿直徑 , 最大切削深度可達 0.9mm |
 |
|||
 |
|||
 |
 |
CXLO Series ．Use LOGX double-sided inserts with 4 cutting edges. ．High feed and high precision cutting edges for good surface finishing. ．16 ~ 50mm cutter diameter, max. 0.9mm depth of cut. |
．使用 LOGX 雙面銑刀片 , 4 個可用切削角 ．高進給及高精度切削刃適用於高溫合金加工 , 達到優良的表面光潔度 ．16 ~ 50mm 刀桿直徑 , 最大切削深度可達 0.9mm |
 |
|||
 |
|||
 |
 |
CXWN Series ．Use WNMX double-sided inserts with 6 cutting edges. ．High feed and low cost for multi-functional applications. ．25 ~ 160mm cutter diameter, max. 1.35mm depth of cut. |
．使用 WNMX 雙面銑刀片 , 6 個可用切削角 ．高進給及低成本適用於面銑、斜坡銑和插銑等多功能加工 ．25 ~ 160mm 刀桿直徑 , 最大切削深度可達 1.35mm |
|
—
|
|||
 |
|||
 |
 |
CALP Series ．Use LPGX inserts with 2 cutting edges. ．High feed and small size cutter for replacing solid carbide tools. ．8 ~ 16mm cutter diameter, max. 0.5mm depth of cut. |
．使用 LPGX 銑刀片 , 2 個可用切削角 ．高進給及小尺寸刀具取代全鎢鋼刀具 , 適用於廣泛的加工及材質應用 ．8 ~ 16mm 刀桿直徑 , 最大切削深度可達 0.5mm |
|
—
|
|||
|
—
|
|||
 |
 |
CAJX Series ．Use JDMT or JDMW inserts with 3 cutting edges. ．High feed and high rigidity cutting edge for wide range applications. ．32 ~ 100mm cutter diameter, max. 2mm depth of cut. |
．使用 JDMT 或 JDMW 銑刀片 , 3 個可用切削角 ．高進給及高剛性切削刀口適用於各種材料和應用 ．32 ~ 100mm 刀桿直徑 , 最大切削深度可達 2mm |
|
—
|
|||
 |
|||
 |
—
|
CASR Series ．Use SDMT or SDNW inserts with 4 cutting edges. ．High feed and more economical for wide range applications. ．50 ~ 80mm cutter diameter, max. 1.5mm depth of cut. |
．使用 SDMT 或 SDNW 銑刀片 , 4 個可用切削角 ．高進給、高經濟及高剛性切削刀口適用於各種材料和應用 ．50 ~ 80mm 刀盤直徑 , 最大切削深度可達 1.5mm |
|
—
|
|||
 |
|||
 |
 |
CF23 Series ．Use WP26 inserts with 3 cutting edges. ．High feed and high rigidity negative designed for hardened steel. ．32 ~ 160mm cutter diameter, max. 2mm depth of cut. |
．使用 WP26 銑刀片 , 3 個可用切削角 ．高進給及高剛性負角設計 , 適用於較硬材料加工 ．32 ~ 160mm 刀桿直徑 , 最大切削深度可達 2mm |
|
—
|
|||
 |