CXAN Series

．Use ANMX double-sided inserts with 4 cutting edges.

．Positive rake angle design for lower side cutting forces.

．Max. 15mm depth of cut, cutter diameter 40 ~ 100mm.

．使用 ANMX 雙面銑刀片 , 4 個可用切削角

．正前角設計可降低切削力        

．每次最大切深可達 15mm , 刀盤直徑 40 ~ 100mm

CXXN Series

．Use XNMX double-sided inserts with 6 cutting edges.

．Economic and high performance shoulder milling application.

．17 ~ 125mm cutter diameter, max. 7mm depth of cut.

．使用 XNMX 雙面銑刀片 , 6 個可用切削角

．經濟與高性能方肩銑應用的最佳解決方案

．17 ~ 125mm 刀桿直徑 , 最大切削深度可達 7mm

CAPK Series

．Use APKT inserts with 2 cutting edges.        

．Optimized chip breaker for various applications and materials.

．16 ~ 125mm cutter diameter, max. 11mm depth of cut.

．使用 APKT 銑刀片 , 2 個可用切削角        

．優化的刀口設計適用於各種加工應用和材料

．16 ~ 125mm 刀桿直徑 , 最大切削深度可達 11mm

CART Series

．Use WRT inserts with 2 cutting edges.        

．Strong chip breaker provides well ramping and slotting capabilities.

．10 ~ 26mm cutter diameter, max. 7mm depth of cut.

．使用 WRT 銑刀片 , 2 個可用切削角        

．強化的刀口設計提供了極佳的斜坡銑削及開槽能力

．10 ~ 26mm 刀桿直徑 , 最大切削深度可達 7mm

CASP Series

．Use SPMG inserts with 4 cutting edges.        

．Cost effective shoulder milling tools.        

．12 ~ 80mm cutter diameter, max. 6mm depth of cut.

．使用 SPMG 單面銑刀片 , 4 個可用切削角        

．經濟實惠的方肩銑刀         

．12 ~ 80mm 刀桿直徑 , 最大切削深度可達 6mm

CATP Series

．Use TPMX inserts with 3 cutting edges.        

．Sharp cutting edges for various low milling force applications.

．20 ~ 80mm cutter diameter, max. 11mm depth of cut.

．使用 TPMX 銑刀片 , 3 個可用切削角        

．出色的銳利刀口設計適用於各種低銑削阻力的應用

．20 ~ 80mm 刀桿直徑 , 最大切削深度可達 11mm

CAXD Series

．Use XDMT inserts with 2 cutting edges.        

．Cutter dia. : 16 ~ 32mm , max. depth of cut : 10mm.

．Cutting edge design provides stable machining and reduces vibration during machining.

．使用 XDMT 銑刀片 , 2 個可用切削刀口        

．刀桿尺寸 : 16 ~ 32mm, 最大切削深度 : 10mm

．刃口設計提供切削穩定性，減少加工時的震動

CAXO Series

．Use XOMT inserts with 2 cutting edges.        

．Optimized chip breaker reduces heat generation and cutting forces.

．6 ~ 32mm cutter diameter , max. 7mm depth of cut.

．使用 XOMT 銑刀片 , 2 個可用切削角        

．泛優化的刀口設計降低熱能產生及切削力 , 能維持長時間高效率加工

．6 ~ 32mm 刀桿直徑 , 最大切削深度可達 7mm

CBAP Series

．Use APMT inserts with 2 cutting edges.        

．Low cost and various geometric designs for versatile applications.

．16 ~ 80mm cutter diameter, max. 11mm depth of cut.

．使用 APMT 銑刀片 , 2 個可用切削角        

．低成本和多樣化的幾何設計適用於多種加工應用

．16 ~ 80mm 刀桿直徑 , 最大切削深度可達 11mm

CR39 Series

．Use W390 inserts with 2 cutting edges.        

．Optimized chip breaker for high efficient shoulder and side milling.

．16 ~ 100mm cutter diameter, max. 11mm depth of cut.

．使用 W390 銑刀片 , 2 個可用切削角        

．優化的刀口設計適用於各種加工材料的高移除率的方肩銑和側銑

．16 ~ 100mm 刀桿直徑 , 最大切削深度可達 11mm

CR49 Series

．Use W490 inserts with 4 cutting edges.        

．Great repeat side milling capability to reduce burs and get good surface finishing.

．20 ~ 80mm cutter diameter , max. 9mm depth of cut.

．使用 W490 單面銑刀片 , 4 個可用切削角

．出色的重複側銑能力可減少毛刺產生並獲得良好的表面光潔度

．20 ~ 80mm 刀盤直徑 , 最大切削深度可達 9mm

CWEX Series

．Use AXMT inserts with 2 cutting edges.        

．Strong cutting edges for high removal rate shoulder milling.

．16 ~ 100mm cutter diameter , max. 11mm depth of cut.

．使用 AXMT 銑刀片 , 2 個可用切削角        

．堅固的切削刃提供高移除率的方肩銑刀        

．16 ~ 100mm 刀桿直徑 , 最大切削深度可達 11mm